Need to make a design decision?
Ask Operator.
What can Ihelp with?
OperatorSearch your data, ask questions, and get tasks done
+ Add
AI can make mistakes. Please double-check results.
Operator works across your engineering data and AI agents in CoLab
Design Engagement System
The human interface for engineering. Where teams review technical data, discuss tradeoffs, and make decisions.
Internal and External Users
Capture feedback and design rationale from your team, customers, and suppliers.
Knowledge Data
A living model for how you make decisions—with inputs from public sources, internal artifacts, and third party standards.
Product Data
The data you need to make design decisions - from CAD, PLM, and other systems.
AI Agents
Proprietary CoLab AI agents that access and reason about your data to complete tasks and make design suggestions.
Operator
Talk to your data and trigger workflows from a dedicated AI interface.
Third Party & Custom Agents
Use the same interface to talk to external agents.
Or build your own (no software experience required).
Implicit & Public Knowledge
External Proprietary Benchmarks
Internal Artifacts
CAD
PLM
Simulation / Testing
COMING NEXT
Use Operator to orchestrate agents across all your tools
Operator already works on your data in CoLab. Next, it will perform agentic actions across the other tools your team uses. Find design data. Run simulations. And sync the results back into CoLab.
COMING NEXT
Build custom agents for your workflows
Build agents in CoLab for the tasks you run repeatedly, then trigger them with Operator.
Test-to-design Traceability Agent
Cross-references physical test results against the design revision tested. Flags revisions that haven't been re-tested after geometry changes.
Tolerance Stackup Agent
Checks tolerance chains across mating parts and flags stack-ups that exceed assembly clearance or fit requirements.
FEA Results Triage Agent
Compares simulation results against design allowables, flags areas exceeding yield or fatigue thresholds, and points to the geometry most likely responsible.
ECO Impact Agent
Traces a proposed change through every assembly, drawing, BOM, supplier, and active program before approval.
GD&T Completeness Agent
Reviews drawings for GD&T completeness and conformance to your team's drafting standards.
DFM Review Agent
Flags features that are hard to manufacture — deep pockets, thin walls, undercuts, draft issues — before the drawing goes to the supplier.
Supplier RFQ Prep Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Material Substitution Agent
When a specified material is unavailable or non-compliant, suggests alternatives with matching mechanical properties from your approved list or MatWeb.
Weight and CG Tracking Agent
Runs on a cadence, pulls mass properties across the assembly, and flags drift from target weight or center of gravity.
Test-to-design Traceability Agent
Cross-references physical test results against the design revision tested. Flags revisions that haven't been re-tested after geometry changes.
Tolerance Stackup Agent
Checks tolerance chains across mating parts and flags stack-ups that exceed assembly clearance or fit requirements.
FEA Results Triage Agent
Compares simulation results against design allowables, flags areas exceeding yield or fatigue thresholds, and points to the geometry most likely responsible.
ECO Impact Agent
Traces a proposed change through every assembly, drawing, BOM, supplier, and active program before approval.
GD&T Completeness Agent
Reviews drawings for GD&T completeness and conformance to your team's drafting standards.
DFM Review Agent
Flags features that are hard to manufacture — deep pockets, thin walls, undercuts, draft issues — before the drawing goes to the supplier.
Supplier RFQ Prep Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Material Substitution Agent
When a specified material is unavailable or non-compliant, suggests alternatives with matching mechanical properties from your approved list or MatWeb.
Weight and CG Tracking Agent
Runs on a cadence, pulls mass properties across the assembly, and flags drift from target weight or center of gravity.
Test-to-design Traceability Agent
Cross-references physical test results against the design revision tested. Flags revisions that haven't been re-tested after geometry changes.
Tolerance Stackup Agent
Checks tolerance chains across mating parts and flags stack-ups that exceed assembly clearance or fit requirements.
FEA Results Triage Agent
Compares simulation results against design allowables, flags areas exceeding yield or fatigue thresholds, and points to the geometry most likely responsible.
ECO Impact Agent
Traces a proposed change through every assembly, drawing, BOM, supplier, and active program before approval.
GD&T Completeness Agent
Reviews drawings for GD&T completeness and conformance to your team's drafting standards.
DFM Review Agent
Flags features that are hard to manufacture — deep pockets, thin walls, undercuts, draft issues — before the drawing goes to the supplier.
Supplier RFQ Prep Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Material Substitution Agent
When a specified material is unavailable or non-compliant, suggests alternatives with matching mechanical properties from your approved list or MatWeb.
Weight and CG Tracking Agent
Runs on a cadence, pulls mass properties across the assembly, and flags drift from target weight or center of gravity.
Test-to-design Traceability Agent
Cross-references physical test results against the design revision tested. Flags revisions that haven't been re-tested after geometry changes.
Tolerance Stackup Agent
Checks tolerance chains across mating parts and flags stack-ups that exceed assembly clearance or fit requirements.
FEA Results Triage Agent
Compares simulation results against design allowables, flags areas exceeding yield or fatigue thresholds, and points to the geometry most likely responsible.
ECO Impact Agent
Traces a proposed change through every assembly, drawing, BOM, supplier, and active program before approval.
GD&T Completeness Agent
Reviews drawings for GD&T completeness and conformance to your team's drafting standards.
DFM Review Agent
Flags features that are hard to manufacture — deep pockets, thin walls, undercuts, draft issues — before the drawing goes to the supplier.
Supplier RFQ Prep Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Material Substitution Agent
When a specified material is unavailable or non-compliant, suggests alternatives with matching mechanical properties from your approved list or MatWeb.
Weight and CG Tracking Agent
Runs on a cadence, pulls mass properties across the assembly, and flags drift from target weight or center of gravity.
Tolerance Stackup Agent
Checks tolerance chains across mating parts and flags stack-ups that exceed assembly clearance or fit requirements.
Supplier RFQ Prep Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Material Substitution Agent
When a specified material is unavailable or non-compliant, suggests alternatives with matching mechanical properties from your approved list or MatWeb.
FEA Results Triage Agent
Compares simulation results against design allowables, flags areas exceeding yield or fatigue thresholds, and points to the geometry most likely responsible.
ECO Impact Agent
Traces a proposed change through every assembly, drawing, BOM, supplier, and active program before approval.
GD&T Completeness Agent
Reviews drawings for GD&T completeness and conformance to your team's drafting standards.
DFM Review Agent
Flags features that are hard to manufacture — deep pockets, thin walls, undercuts, draft issues — before the drawing goes to the supplier.
Weight and CG Tracking Agent
Runs on a cadence, pulls mass properties across the assembly, and flags drift from target weight or center of gravity.
Test-to-design Traceability Agent
Cross-references physical test results against the design revision tested. Flags revisions that haven't been re-tested after geometry changes.
Tolerance Stackup Agent
Checks tolerance chains across mating parts and flags stack-ups that exceed assembly clearance or fit requirements.
Supplier RFQ Prep Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Material Substitution Agent
When a specified material is unavailable or non-compliant, suggests alternatives with matching mechanical properties from your approved list or MatWeb.
FEA Results Triage Agent
Compares simulation results against design allowables, flags areas exceeding yield or fatigue thresholds, and points to the geometry most likely responsible.
ECO Impact Agent
Traces a proposed change through every assembly, drawing, BOM, supplier, and active program before approval.
GD&T Completeness Agent
Reviews drawings for GD&T completeness and conformance to your team's drafting standards.
DFM Review Agent
Flags features that are hard to manufacture — deep pockets, thin walls, undercuts, draft issues — before the drawing goes to the supplier.
Weight and CG Tracking Agent
Runs on a cadence, pulls mass properties across the assembly, and flags drift from target weight or center of gravity.
Test-to-design Traceability Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Tolerance Stackup Agent
Checks tolerance chains across mating parts and flags stack-ups that exceed assembly clearance or fit requirements.
FEA Results Triage Agent
Compares simulation results against design allowables, flags areas exceeding yield or fatigue thresholds, and points to the geometry most likely responsible.
ECO Impact Agent
Traces a proposed change through every assembly, drawing, BOM, supplier, and active program before approval.
Test-to-design Traceability Agent
Cross-references physical test results against the design revision tested. Flags revisions that haven't been re-tested after geometry changes.
GD&T Completeness Agent
Reviews drawings for GD&T completeness and conformance to your team's drafting standards.
Material Substitution Agent
When a specified material is unavailable or non-compliant, suggests alternatives with matching mechanical properties from your approved list or MatWeb.
DFM Review Agent
Flags features that are hard to manufacture — deep pockets, thin walls, undercuts, draft issues — before the drawing goes to the supplier.
Weight and CG Tracking Agent
Runs on a cadence, pulls mass properties across the assembly, and flags drift from target weight or center of gravity.
Supplier RFQ Prep Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Tolerance Stackup Agent
Checks tolerance chains across mating parts and flags stack-ups that exceed assembly clearance or fit requirements.
FEA Results Triage Agent
Compares simulation results against design allowables, flags areas exceeding yield or fatigue thresholds, and points to the geometry most likely responsible.
ECO Impact Agent
Traces a proposed change through every assembly, drawing, BOM, supplier, and active program before approval.
Test-to-design Traceability Agent
Cross-references physical test results against the design revision tested. Flags revisions that haven't been re-tested after geometry changes.
GD&T Completeness Agent
Reviews drawings for GD&T completeness and conformance to your team's drafting standards.
Material Substitution Agent
When a specified material is unavailable or non-compliant, suggests alternatives with matching mechanical properties from your approved list or MatWeb.
DFM Review Agent
Flags features that are hard to manufacture — deep pockets, thin walls, undercuts, draft issues — before the drawing goes to the supplier.
Weight and CG Tracking Agent
Runs on a cadence, pulls mass properties across the assembly, and flags drift from target weight or center of gravity.
Supplier RFQ Prep Agent
Assembles the drawing package, tolerance callouts, material specs, and quantities for a new part — and routes it to qualified suppliers.
Ready to make faster decisions?
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
We store and process the data in this form to respond to your request.
For more information on how we use data, please refer to our Privacy Policy.
